Learn about the technology behind satellite navigation systems and discuss the pros and cons of using them Can your students consider how a GPS system functions and discuss the advantages and disadvantages of using them? This activity is suitable for KS3 and KS4 and encourages students to undertake research and produce a visual display. This activity is an engaging investigation into the uses of communication technology in the modern world. This activity is an individual activity and could be run in an ICT suite to allow students to use the internet for research. Distribute the Sat Nav handout to students. This handout gives some outline information about satellites and an un-annotated diagram. Students can cut out or copy the un-annotated diagram and add information to this to produce a visual display of how a Sat Nav system works. There are a series of questions on the Sat Nav handout. Questions 1-4 are designed to get students to undertake research on the topic of satellites and their functionalities and capabilities. This is a simple activity that will take approximately 30 minutes to complete. How does a Sat Nav system work? What we often refer to as ‘Sat Nav’ is properly called the Global Positioning System (GPS). This uses satellites that continually transmit a signal. They are like an accurate orbiting clock. The signal from at least three and up to seven satellites is received and compared by the Sat Nav device. Using some complicated maths, the Sat Nav device can work out not only where it is on the Earth’s surface, but at what altitude it is as well. The position information is compared with a map downloaded and stored by the Sat Nav device. The satellites tell you where you are, and the mapping hardware fills in the pictures of the road around you. The satellites need to have a clear path through the air to the Sat Nav device – this is normally called a clear line of ‘sight’. The engineering context Living in a highly technological world, where access to information and entertainment is at our fingertips, the Inform and Entertain Me topic is a gateway to engage and introduce students to the principles and technology that form the basis for communication devices that are used in our everyday lives. Download the free How does a Sat Nav system work? activity sheet! All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Structured class debate on the location of a new wind farm There is much debate about the issues created by carbon emissions and how renewable energy sources can help resolve these challenges. Most people agree that renewable energy is a good thing, but many oppose to having wind turbines built near their neighbourhood. In this role-play activity, participants take on different roles to debate a proposed wind farm. In pairs, students discuss whether their character would be in favour of the proposed wind farm and prepare a two-minute talk to share their case with the group. Afterwards, divide the larger groups into ‘for’ and ‘against’ and bring together all the individual statements to form a strong, coherent case. Four people are chosen to give two reasons to support their argument. Activity info, teachers’ notes and curriculum links This activity has been written with a strong science bias. However, it can easily be taught in design and technology with either a systems and control approach or from a ‘sustainability’ angle, looking at the topic of wind farms and the future of energy production. The ‘sustainability’ perspective will provide an activity that could involve design and technology, geography and citizenship. Download the activity sheets for free! All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your classroom learning highlights with us @IETeducation The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.

Investigate the properties of smart springs and see how they might be used as muscles in a robotic arm This fun engineering activity encourages students to investigate prosthetic materials and the properties of smart springs and see how they could be used as muscles in a robotic arm. This is a free resource aimed at secondary school students. This activity encourages students to investigate the properties of smart materials and carry out some data manipulation. Students will also explore the possible moral and ethical issues associated with people potentially choosing to replace healthy body parts with artificial prostheses because they offer higher performance. This exercise should take around an hour to complete. Resources required for class: Several desk fans should be available but kept out of sight of the students until needed. Resources required per team: Wooden ‘arm’ as shown in the diagram on the handout below. These will need to be constructed in advance of the lesson. This could be done either by the science technician or by the students themselves as part of a joint project with design and technology. 1 to 1.5 mm diameter copper or other fairly flexible metal wire. Must be stripped of insulation A smart spring made from a shape memory alloy such as nitinol Power supply, leads, crocodile clips Retort stand Ammeter Voltmeter Sets of slot masses of various sizes The engineering context The development of new materials with incredible properties is changing the way we live. From LCD TVs to super light airliners, these materials have quickly found their way into the modern technology around us. One area where modern materials have made a huge impact is in the development of prosthetic devices. Some of these devices are beginning to outperform ‘natural’ body parts. Suggested learning outcomes By the end of this activity learners will be able to explain why a material is chosen for a use based on its properties, they will be able to describe how smart materials are used in a real life context and they will be able to use and manipulate material-related data. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Analyse data to find the best material for a prosthetic foot The development of new materials is having a huge impact on all of our lives. This engineering activity for kids encourages students to look at a variety of materials and find out which would be the best for ankle and foot prosthetics. Different materials will perform in a variety of different ways, and it is through the analysis of the materials that students will be able to work out which would be the best for a prosthetic foot. This fun STEM activity is designed as a main lesson exercise for secondary school students. Learners will carry out some data manipulation to find the best material from which to make a prosthetic foot. The activity offers strong opportunities for cross-curricular work with Mathematics. The class will be split into teams. Students will work as teams of engineering materials consultants and have to find the best material from which to make a prosthetic foot. Using the related handouts, which can be found below, students will plot graphs of stress against strain for seven different materials and calculate the gradient in order to find the stiffness for each material. Based on this information, students should select which of the seven materials is the most suitable for the construction of the foot. Students will present their recommendations to the rest of the class and the other teams will comment on their recommendations. What you will need: Graph paper Pen/pencil The engineering context The development of new materials with incredible properties is changing the way we live. From LCD TVs to super light airliners, these materials have quickly found their way into pretty much all of the modern technology around us. One area where modern materials have made a huge impact is in the development of prosthetic devices. Some of these devices are beginning to outperform ‘natural’ body parts. The resources within this, and the related activities, encourage students to investigate the properties of smart materials and carry out some data manipulation. Students will also explore the possible moral and ethical issues associated with people potentially choosing to replace healthy body parts with artificial prostheses because they offer higher performance. By the end of this activity students will be able to make the link between material properties and material usage. They will be able to understand how smart materials are used in a real life context and they will be able to use and manipulate material-related data.

Investigate aspects of biomedical signal processing The use of different types of signals is hugely important in all areas of healthcare. Signal processing engineers are involved in everything from extracting information from the body’s own electrical and chemical signals to using wireless signals to allow search-and-rescue robot swarms to communicate with each other. Activity info, teachers’ notes and curriculum links In this practical session students investigate aspects of signal processing. Working in teams, students convert an analogue brain signal into a digital format and transmit it across the classroom to another team using flashes from the LED on the Digital Communicator that they will need to build. The other team will record the digital format and rebuild the original waveform from that information. This activity can be used as a hands-on extension to the ‘Which Imaging Technique?’ activity (see Related activities section below). The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

Select a method of medical imaging most appropriate for a particular medical condition The use of different types of signals is hugely important in all areas of healthcare. Signal processing engineers are involved in everything from extracting information from the body’s own electrical and chemical signals to using wireless signals to allow search-and-rescue robot swarms to communicate with each other. Together with related activities, this resource allows students to investigate the wide range of sophisticated imaging technology available in modern hospitals, and to explore the latest ideas in search-and-rescue robotics. Activity info, teachers’ notes and curriculum links This activity gets students to work in small teams to select a method of medical imaging which is appropriate to a particular medical condition. Students are provided with the medical records of eight patients. The different imaging techniques covered in this activity include: CAT, Gamma cameras, MRI, PET, Thermology, Ultrasound and X-rays. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

Balancing forces to design a boat Using knowledge of forces in an engineering design context The balancing forces to build a boat activity tasks participants to apply scientific and mathematical understanding of forces (resistance, buoyancy and thrust) and Newton’s 3 laws of motion, in an engineering and design context. Relate speed to the streamlining in boat design and the shape of a boat’s hull. Consider the balanced and unbalanced forces the boat needs to withstand for maximum efficiency. This activity will demonstrate the principles of hydrodynamics, a similar set of principles to aerodynamics but involving water. This activity is designed to be taught through science and design and technology simultaneously, as a cross-curricular project. However, it can also be tackled independently from each subject. All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. Tools/resources required Projector/whiteboard The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. Please do share your classroom learning highlights with us @IETeducation

Learn about the robots used to perform remote surgery and the important role of electromagnetism Telemedicine is a new and fast-developing field in healthcare. Even 20 years ago the idea of a surgeon being able to operate a robot from hundreds of miles away in order to perform an operation seemed like science fiction. Today, this is not only possible but engineers, working with scientists and doctors, are now designing robotic systems which will be able to operate on patients with no human intervention at all. This activity is a quick, engaging introduction to a lesson using telemedicine and robotics as a context to explore electromagnetism and the link between technology and real-life science. Download the activity sheets for free! And please do share your classroom learning highlights with us @IETeducation

Discover the properties of the piezoelectric crystal and how it can be used to generate electricity The engineers behind the Watt Nightclub in Rotterdam turn the energy created by clubbers on the dance-floor into power for the lighting. There’s even a giant battery to monitor the energy and encourage the crowd to dance even more. Doing your bit for the environment doesn’t have to be boring! Activity info, teachers’ notes and curriculum links An engaging activity where students will investigate a simple piezoelectric device. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

How sounds travel as waves of different frequencies and wavelengths From founding communications, such as the fire beacon, to being able to communicate with space, there is no denying that developments in communication have advanced at a rapid speed. This topic presents students with communications of the past, present and future, helping them to understand the principles that form the basis for these developments. This engaging STEM activity is aimed at KS3 students and deals with how animals use sounds and how sounds change in natural phenomena. This is so a student can understand how sound waves travel. The teacher will first distribute a copy of the ‘Animal Sounds’ handout, which can be downloaded below, to each student. Make sure students understand sound is a longitudinal wave of compressions and rarefactions of the material. Soundwaves follow the laws of wave behaviour, so they are a useful introduction to wave properties. This activity can be simplified (particularly for less able students) by creating a discussion on why different animals have different hearing ranges and their experience of phenomena such as the Doppler effect. Use the handout to discuss different sounds and what they might have learned in other lessons (e.g. music) about pitch, frequency, amplitude etc. As an extension students could produce a display from low to high frequency, showing where the sound ranges used by different animals lie. Students could consider how sounds outside the normal spectrum could be used to develop new products. For example, to make ‘silent’ devices to broadcast sound or data between two points. This is a quick and simple activity that will take approximately 15 minutes. The engineering context Sounds are vibrations travelling through materials. Many animals make sounds, either for communication or for location. Sound travels at different speeds in different materials. Generally, the denser the material, the faster the sound will travel. Sound is a longitudinal wave of compressions and rarefactions of the material (a rarefaction involves particles in the material being more spread out than usual). Sound waves follow the laws of wave behaviour, so they are a useful introduction to wave properties. Suggested learning outcomes By the end of this free resource students will know that sound is produced by objects vibrating and they will understand that sound is a longitudinal wave. They will also know about the range of frequencies that can be heard by humans and other animals and they will understand that sound travels at different speeds in different mediums. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Please share your classroom learning highlights with us @IETeducation

Investigate the salinity of different water samples Water is crucial to human life, but it can also be a killer. Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases. Activity info, teachers’ notes and curriculum links In this practical activity students investigate the salinity of three different water samples using a multimeter. Students first calibrate their salination probe and test the salinity of their solutions. Students can be asked to suggest how errors might have appeared in their results and what could be done to minimise or eliminate them. This activity can be used as an extension to the ‘Filtering water’ activity. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

This is a practical exercise in which students will utilise their mathematical knowledge to solve problems and apply formulas. Specifically, they will compute the length of pipes necessary for an underfloor heating system. They will also write a brief explanation of how a sustainable underfloor heating system operates. This can be effectively taught within mathematics or within design and technology, as part of resistant materials or product design. How long will this activity take? This activity will take approximately 60-90 minutes to complete Tools/resources required Green School film Projector/Whiteboard Measuring equipment e.g. tape measures or trundle wheels Squared paper The engineering context Sustainability is a key consideration in modern engineering practices. As the world faces pressing environmental challenges such as climate change and resource depletion, engineers must design solutions that not only meet the needs of society, but also minimise their impact on the planet. Sustainable engineering involves developing systems, products and processes that are socially, economically, and environmentally responsible. This can include reducing carbon emissions, optimising energy use, minimising waste, conserving natural resources, and designing products that can be recycled or repurposed at the end of their lifecycle. Suggested learning outcomes By the end of this activity students will be able to describe the operation of a sustainable underfloor heating system and they will be able to create and apply mathematical formulae in a practical context. Download the free Maths Behind a Heating System activity sheet! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Students compete to make the strongest electromagnetic tool holder for a surgeons robotic arm. A practical activity where students work in teams to build their own electromagnet and use this to make an ‘arm’ with an electromagnetic gripper at one end. They are given some basic parts to start and a budget - a sum of ‘money’ or tokens with which to buy the other parts. Once their arm and gripper are complete they have 30 seconds to move as many paper clips from one pile to another as possible. The team moving the most paper clips in the allotted time is the winner. This activity makes students consider the factors involved in electromagnet strength and design. Download the activity sheets for free! And please do share your classroom learning highlights with us @IETeducation

**This activity gets students to use their knowledge of electromagnetism in order to design and build a magnetic tool holder for a surgical robot. ** Students learn how simple scientific principles can be used in sophisticated applications, how electric circuits can be switched on and off, and the factors that can affect the strength of an electromagnet. Activity introduction Each group is a dedicated design team with a compelling mission – to craft a comprehensive outline design for a tool holder tailored to seamlessly integrate with a surgical robot’s arm. The task at hand: • Each surgical tool boasts a magnetic fitting, necessitating the utilisation of an electromagnet within the tool holder to ensure a secure grip. • A dynamic approach is required considering the diverse range of sizes and weights among these tools; This entails varying the electromagnet’s strength to account for this. Guided by these challenges, teams will brainstorm, innovate, and collaborate to present their inventive solutions in a concise one-minute presentation to the rest of the class and assessed according to the success criteria on the design brief. The engineering context Telemedicine employs contemporary communication technology to provide medical diagnoses and patient care, even when the physician and patient are geographically separate. Remote surgery entails utilising robotic systems within the operating room to aid surgeons during procedures. The surgeon observes the patient through a terminal and controls robotic surgical instruments using a specialised console. Suggested learning outcomes Upon completion of this activity, students will gain an understanding of the capabilities of surgical robots. They will grasp the transformation of basic scientific principles into intricate applications, comprehend the functioning of electric circuits’ activation and deactivation, and discern the variables impacting the strength of an electromagnet. Download the free activity sheet! All activity sheets and supporting resources are free to download, and all the documents are fully editable so that you can tailor them to your students and your schools’ needs. The activity sheet includes teacher notes, guidance, helpful web links, and links (where appropriate) to the national curriculum in the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Explore the body parts that can be replaced with prosthetic devices With the constant advancement in materials and prosthetic technology, this engineering activity for kids explores different materials and their suitability in the use of prosthetics for different body parts. Students will gather data on different materials to create a presentation that can be used to discuss new materials and the part that they play in the development of prosthetic devices. This free STEM resource is aimed at secondary school students. Students will be encouraged to think about how technology is changing our society. This lesson can be introduced by talking about skeletons. An anatomical skeleton can be used as a prop. Do you know what can be done when joints wear out in our skeletons? Students will be divided into teams and asked to come up with a list of body parts that can be replaced with prosthetic devices. Each team will explain their results to the rest of the class. Students can vote for the device they think is most likely to be made in the future. This activity will take roughly 15 minutes to complete. The engineering context The development of new materials with incredible properties is changing the way we live. From LCD TVs to super light airliners, these materials have quickly found their way into the modern technology around us. One area where modern materials have made a huge impact is in the development of prosthetic devices. Some of these devices are beginning to outperform ‘natural’ body parts. The resources within this, and the related activities, encourage students to investigate the properties of smart materials and carry out some data manipulation. Students will also explore the possible moral and ethical issues associated with people potentially choosing to replace healthy body parts with artificial prostheses because they offer higher performance. Suggested learning outcome By the end of this activity students will be able to explain what joints are and how they work. They will also be able to suggest links between modern technology and health. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Organise water filtration components to create a safe water supply system Activity info, teachers’ notes and curriculum links This activity challenges students to work in small teams to design a water supply system for a small town of 5,000 inhabitants. They have to work within a budget, including giving themselves a profit margin. The activity offers strong opportunities for cross-curricular work with Enterprise. The ‘Catalogue of Components’ handout includes a list of possible parts from which students can include in their design of their filtration system. Water is crucial to human life, but it can also be a killer. Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

A fun engineering challenge for KS3 that will give students the opportunity to test boat hull designs in a test tank. Through this process, students will learn about the importance of applying relevant scientific and mathematical understanding when refining and developing an idea. This activity allows students to explore and develop their critical thinking and decision-making skills through a practical approach. The experiment ensures a ‘fair’ set of results is produced. The success of their overall boat hull design is directly dependent upon how well they apply their knowledge and understanding across the disciplines. In addition, key learning points needs to be reinforced through mathematics. The students could carry out initial research into different hull shapes used for various types of boat, and they should produce an image board of hulls with annotations to explain why the shape of the hull is appropriate for the particular type of boat. Types of boat hulls that could be researched include yachts, cruise ships, speed boats, fishing boats, container ships, and catamarans. This activity is designed to be taught through science and design and technology simultaneously, as a cross-curricular project and ideal for use in a STEM Club. However, it can also be tackled independently from each subject. Tools/resources required Test Tank (the construction is a fairly simple activity and can be undertaken by your KS3 students (as an after school activity) or by a technician) Vacuum Former High Impact Polystyrene/MDF or softwood blocks Optionally, modelling clay General Workshop Facilities Stopwatch Masses with a suitable holder The engineering context The focus of this activity is on the principle of hydrodynamics (a similar set of principles to aerodynamics but involving water). Suggested learning outcomes By the end of this activity students will be able to understand the importance of testing models and prototyping within the development of an idea, the need for streamlining in boat design and the principles of hydrodynamic design. Students will also be able to refine ideas in order to improve outcomes, they will be able to relate the shape of the hull to speed and the forces it needs to withstand maximum efficiency and they will be able to apply scientific and mathematical understanding to an engineering context. All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Please share your classroom learning highlights with us @IETeducation

Card game to consolidate understanding of electronic systems The role of smart sensors in our everyday lives is becoming increasingly fundamental. The Smart Sensor Communications topic focuses on what smart sensors are, how they are being used today and how they can be innovative in the future. Students are introduced to some recent developments in using smart sensors in control systems. Many of these uses are in health care and other high-tech applications. Activity info, teachers’ notes and curriculum links In this activity students learn the differences between smart sensors and ordinary sensors by studying some applications of smart sensors. They may also use a card game to consolidate their understanding of electronic systems. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales. Download the activity sheets for free! All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. You can stream and download the related films by clicking on the appropriate link in the related resources section. And please do share your classroom learning highlights with us @IETeducation

The new materials changing the way we live Discover and explore the new materials changing the way we live with our Smart and modern materials activity. The development of new materials with incredible properties are changing the way we live: from LCD TVs to super light airliners, these materials have quickly found their way into pretty much all of the modern technology around us. Activity info, teachers’ notes and curriculum links In this practical lesson, students conduct different tests on a selection of materials and identify each one from its properties. The tests include Eureka cans, electrical circuits, and other interesting investigations to test the density, hardness, magnetic and conductive properties of materials. This activity can be tailored to include tests that best investigate the properties of the materials you have available. Download the activity sheets for free! All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your classroom learning highlights with us @IETeducation Tools/resources required Resources required for class: Samples of 8 to10 different materials, with more than one sample of each if possible. All the samples should be able to fit in the available eureka cans Access to accurate weighing scales Safety glasses. Resources required per team: HB pencil, copper coin*, knife**, iron nail, small steel file Eureka can and an accurate measuring cylinder A magnet Powerpack/battery pack, 3 leads, light bulb and holder, crocodile clips A pad of sticky notes. The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales. To watch the ‘Nature reinvented’ video, please visit IET Education website.

Identifying which materials might offer the best prospects for a financial investment In this activity, students will investigate the properties of different types of smart materials and decide which ones might offer the best prospects for financial investment. The development of new materials with incredible properties is changing the way we live. From 4K TVs to super light airliners, these materials have quickly found their way into the modern technology around us. One area where modern materials have made a huge impact is in the development of prosthetic devices. Some of these devices are beginning to outperform ‘natural’ body parts. This is one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (DT) and science. Activity: Identifying which materials might offer the best prospects for a financial investment Learners will investigate the properties of different categories of smart materials and decide which kinds of materials might offer the best prospects for a financial investment. Students work in teams and present their results to the rest of the class. The activity offers strong opportunities for cross-curricular work with Enterprise. This activity can be extended with a related practical session ‘Smart and modern materials’, where students identify a material from its particular properties. The engineering context Smart materials are often at the forefront of engineering and technological innovation with engineers using them to create products that are more durable, adaptable and more efficient to manufacture. From building structures that can withstand earthquakes to designing prosthetics that outperform human body parts, the applications of smart materials are vast (and continually expanding!). By learning about smart materials, students will get an insight into how these modern materials are made, used and how they can be applied to real world issues such as improving people’s lives. Suggested learning outcomes This lesson will teach students how to recall a variety of different examples of smart materials and describe how their properties react to changes in their environment. They’ll also be able to investigate smart materials on both a theoretical and practical level, understanding their applications as well as their investment potential. Download our activity sheet for free! The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including film clips!), and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your highlights with us @IETeducation